Automatic watering system

Nur Nabilah Ismail; Ku Nurin Jazlina Ku Helmi

DSpace Home
→
FINAL YEAR PROJECT
→
Department of Electrical Engineering (JKE)
→
View Item

dc.contributor.author	Nur Nabilah Ismail
dc.contributor.author	Ku Nurin Jazlina Ku Helmi
dc.date.accessioned	2022-12-28T07:10:14Z
dc.date.available	2022-12-28T07:10:14Z
dc.date.issued	2016
dc.identifier.uri	http://repository.psp.edu.my/xmlui/handle/123456789/111
dc.description	Water content or moisture content is the quantity of water contained in a material, such as soil (called soil moisture), rock, ceramics, fruit, or wood. Water content is used in a wide range of scientific and technical areas, and is expressed as a ratio, which can range from 0 (completely dry) to the value of the materials’ porosity at saturation. It can be given on a volumetric or mass (gravimetric) basis. Volumetric water content, 0, is defined mathematically as : where is the volume of water and is the total volume (that is soil volume + water volume + air space). Gravimetric water content [1] is expressed by mass (weight) as follows: where is the mass of water and is the bulk mass. The bulk mass is taken as the total mass, except for geotechnical and soil science applications where oven-dried soil (see the diagram) is conventionally used as. To convert gravimetric water content to volumetric water, multiply the gravimetric water content by the bulk specific gravity of the material. In soil mechanics and petroleum engineering, the term water saturation or degree of saturation, is used, defined as where is the porosity and is the volume of void or pore space. Values of Sw can range from 0 (dry) to 1 (saturated). In reality, Sw never reaches 0 or 1 – these are idealizations for engineering use. The normalized water content, (also called effective saturation or) is a dimensionless value defined by van Genuchten [2] as : where is the volumetric water content; is the residual water content, defined as the water content for which the gradient becomes zero; and, is the saturated water content, which is equivalent to porosity, so we designed Automatic Watering System which is a simple system, using Arduino to automate the irrigation and watering of small a simple system, using Arduino to automate the irrigation and watering of small potted plants or crops. This system does the control of soil moisture, doing indications via LEDs and in case of dry soil emitting a alarm beep. In case of dry soil it will activate the irrigation system pumping water for watering plants. The system uses a LCD display to notify all actions that are taking place and a real time clock. This system does the control of soil moisture, doing indications via LEDs and in case of dry soil emitting a larm beep. In case of dry soil it will activate the irrigation system pumping water for watering plants. The systems uses a LCD display to notify all actions that are taking place and a real time clock.	en_US
dc.language.iso	other	en_US
dc.relation.ispartofseries	;1670
dc.subject	Water-supply engineering	en_US
dc.title	Automatic watering system	en_US
dc.type	Other	en_US